This is the procedure set by Bosch to reset the AdBlue system using Vediamo for CR42/CR43/CR60LS/CR61:
SCRCM
1. Init Contact
2. DJ_Zugriffsberechtigung_Drive
3. DL_End_of_Line_Task_Inducementsystem
4. ECU reset / Ignition OFF/ON
5. Read Faults Codes
ECU
1. Init Contact
2. DJ_Entriegelung_9A
3. DJ_Entriegelung_BC
4. DL_046C_SCRCtl_ctTampProt
5. DL_0471_End_of_LineTask_Inducement
6. ECU Reset / Ignition OFF/ON
7. Read Fault Codes